Fisnar F4200N: Difference between revisions

From www.evillabs.net
Jump to navigation Jump to search
No edit summary
Line 17: Line 17:
|| Code || Action || Returns
|| Code || Action || Returns
|-
|-
| 0xdf || Reset serial port || << Control By RS232 Ver 2.6 >>
| 0xdf || Reset serial port || << Control By RS232 Ver 2.6 >>  
||
||
|-
|-

Revision as of 23:31, 4 November 2019

Fisnar F4200N (and other F4000N class devices)

Serial Control

  • Select 'Teach' mode
  • Use the Teaching Pendant to select Control By RS232 Mode (see manual)
  • Select 'Run' mode
  • Connect at 115200,8n1 (null modem cable required)

All axis values are in decimal mm. Ie '100' or '12.568'

Code Action Returns
0xdf Reset serial port << Control By RS232 Ver 2.6 >>
go Start current program ok
st Pause until START button pressed ok
in ??? 0

ok

iv ??? 1

ok

ha Home all axes ok
hx Home X axis ok
hy Home Y axis ok
hz Home Z axis ok
la X,Y,Z Start moving all axes ok
lx X Start moving X axis ok
ly Y Start moving Y axis ok
lz Z Start moving Z axis ok
pa Show all axes position X,Y,Z

ok

px Show X axis position X

ok

py Show Y axis position Y

ok

pz Show Z axis position Z

ok

wait Wait for all preceding movement commands to finish ok