Project BrundleFab

From www.evillabs.net
Revision as of 19:29, 20 September 2014 by Ezrec (talk | contribs) (Created page with "= BrundleFab - a 3D Printer Experiment = == Design Notes == === Connecting an Arduino Mega2560 to a Seed Studio SD Card v3.1 Shield === Well, it doesn't just snap on and wo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

BrundleFab - a 3D Printer Experiment

Design Notes

Connecting an Arduino Mega2560 to a Seed Studio SD Card v3.1 Shield

Well, it doesn't just snap on and work. You need to route some pins:

MEGA Pin SD Shield Function
ICSP1 D12 MOSI
ICSP2 5v 5v
ICSP3 D13 SCK
ICSP4 D11 MISO
ICSP6 GND Gnd
D53 D10 SS

Use the arduino SD library, with a 'const int chipSelect=SS;' and you are good to go.