Difference between revisions of "Project ip-usbph"

From www.evillabs.net
Jump to: navigation, search
(Download)
(Download)
Line 20: Line 20:
 
The sources are available via:
 
The sources are available via:
  
* [http://www.evillabs.net/cgi-bin/gitweb.cgi?p=ip-usbph.git;a=summary GIT Repository]
+
* [https://github.com/ezrec/ip-usbph GitHub Repository]
 
* [http://www.evillabs.net/ip-usbph/libip-usbph-0.1.tar.gz http://www.evillabs.net/ip-usbph/libip-usbph-0.1.tar.gz]
 
* [http://www.evillabs.net/ip-usbph/libip-usbph-0.1.tar.gz http://www.evillabs.net/ip-usbph/libip-usbph-0.1.tar.gz]
  

Revision as of 20:42, 12 June 2009

Introduction

This is the page for Linux support library for the Holtek Semiconductor, Inc. based Kinamax/Sabrent IP-USBPH VoIP phone, as pictured below.

Kinamax IP-USBPH.jpeg

This wired USB phone is based off of a Holtek Semiconductor MCU, and is recognized in Linux as a "GoodCom WJT602" USB audio device, with a HID input device:

[45395.505831] input: GoodCom WJT602 USB Audio Device as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.3/input/input23
[45395.560226] input,hiddev96,hidraw0: USB HID v1.10 Device [GoodCom WJT602 USB Audio Device] on usb-0000:00:1d.0-2

lsusb reports this device as:

$ lsusb -d 04d9:0602
Bus 001 Device 004: ID 04d9:0602 Holtek Semiconductor, Inc. 
$

Download

The sources are available via:

What does libip-usbph do?

The library has APIs for the following:

  • Setting all symbols on the LCD
  • A built-in ASCII to 14-segment LCD font converter
  • Backlight control
  • Keypad events

The library does not control the microphone nor the speaker of the phone - use the standard Linux ALSA USB audio for those services.

License

This clean-room engineered library is licensed under the LGPL.