Difference between revisions of "Project usense"

From www.evillabs.net
Jump to: navigation, search
(NOTES)
(Download)
Line 35: Line 35:
 
= Download =
 
= Download =
  
Get it from [http://github.com/ezrec/usense my GitHub repo] or check [http://www.research-service.com/custom-research-paper.html research papers]
+
Get it from [http://github.com/ezrec/usense my GitHub repo]

Revision as of 23:32, 17 October 2009

usense USB Sensors

Supports the Vernier GoTemp and the TEMPer1 USB temperature sensors via libusb.

Vernier GoTemp!

The Vernier GoTemp! looks like this:

Vernier GoTemp!.jpg

NOTES

  • Expensive
  • Requires calibration
  • Probe is not salt-water tolerant.
  • When potted in epoxy, probe lasted 12 months

TEMPer

The TEMPer1 and TEMPerNTC devices look like this:

TEMPerNTC.jpg

Supports the TEMPer, TEMPer1 (with external probe), and TEMPerNTC (with external probe)

NOTES

  • Cheap
  • Factory calibrated
  • Probe on TEMPer1 is not salt-water tolerant over a long period
  • Internal hardware of the TEMPer1 has changed, from a USB Serial to a USB HID device

After about 3-4 months, salt water will get between the wire and the epoxy, and reach the integrated circuit inside. I do not recommend this device as-is for salt-water immersion.

Download

Get it from my GitHub repo