Project usense

From www.evillabs.net
Revision as of 21:30, 30 September 2009 by Ezrec (Talk) (NOTES)

Jump to: navigation, search

usense USB Sensors

Supports the Vernier GoTemp and the TEMPer1 USB temperature sensors via libusb.

Vernier GoTemp!

The Vernier GoTemp! looks like this:

Vernier GoTemp!.jpg

NOTES

  • Expensive
  • Requires calibration
  • Probe is not salt-water tolerant

TEMPer

The TEMPer1 and TEMPerNTC devices look like this:

TEMPerNTC.jpg

Supports the TEMPer, TEMPer1 (with external probe), and TEMPerNTC (with external probe)

NOTES

  • Cheap
  • Factory calibrated
  • Probe on TEMPer1 is salt-water tolerant (so far)
    • UPDATE: After about 3-4 months, salt water will get between the wire and the epoxy, and reach the integrated circuit inside. I do not recommend this device as-is for salt-water immersion.

Download

Get it from my GitHub repo.